How Do You Measure For Bottom Mount Drawer Slides

Measure the width of the cabinet frame as well so you can center the drawer slide precisely in the frame.

How do you measure for bottom mount drawer slides. Mark the center point of the drawer front and back on the cabinet frame pieces. For side-mount and center-mount slides typically measure the distance from the front edge of the cabinet to the inside face of the cabinet back and then subtract 1. The drawer is mounted using blum Tandem undermount slides.

The width of the drawer will depend on slide chosen and the side-to-side clearance needed for that slide. For the mounting screws to take hold you will need to make your drawer bottoms 12 inch thick or possibly add a space if you are using thinner bottoms. In this video a Rockler associate explains the variations in mounting styles available.

With one screw holding the front of the slide in place measure from the drawer side to make sure the slide sits centered and parallel. Figuring out the Right Size of Drawer Slide. For undermount slides measure the drawer length.

Drawer Slide Length Slides most commonly come in sizes ranging from 10 to 28 though some shorter and longer slides are available for special applications. Pull out your drawer to locate the current slide hardware. Key Measurements to Take Measure the length of the drawer from its front inside frame to the rear panel.

Attach to the drawer first Cut the notch for the slide at least 18 wider on each side to the depth of the drawer bottom. Make sure to check the spec sheet for the slide chosen. On this particular project I had to block the drawer slides out 14 on each side.

A too-short slide prevents the drawer from opening fully and one thats too long wont fit in the cabinet. For side-mount and center-mount slides typically measure the distance from the front edge of the cabinet to the inside face of the cabinet back and then subtract 1. You need half an inch on each side of the drawer box in order to mount the glides.