How Do You Measure For Replacement Drawer Slides

So the way you have to measure this is you have to measure the length of each part of the slide so youll need to measure just the drawer member the part that goes down into the drawer and measure that and find out what that is and then match that up with the cabinet and then match up the cabinet member thats the one with all the holes in there.

How do you measure for replacement drawer slides. Drawer height is set to the maximum supported unless a specific height is provided. The width of the drawer will depend on slide chosen and the side-to-side clearance needed for that slide. For under-mount slides measure the drawer length.

19-14 clear opening - 1-116 18-316 will be the pulloutrollout width. A too-short slide prevents the drawer from opening fully and one thats too long wont fit in the cabinet. Other important factors to consider include type of locking system which drawer disconnect method you prefer and if you.

Remove and Replace First remove the drawer by pulling it out and lifting the glides from the guide tracks. To determine the proper length measure the interior depth of the cabinet behind the face frame if there is one and choose a slide the next size shorter than that measurement. To determine your clearance measure the outside width of the drawer box.

Log in or Sign Up to access Advanced Mode. This calculator creates the measurements for a drawer box. Make sure to check the spec sheet for the slide chosen.

Now measure the inside width of the cabinet. Lift up on the front of the drawer and if that doesnt work try lifting on the back of the drawer to lift it out of the current glides. The front joint is variable.

This is for the 58 slide versio. Slides come in lengths from 10 to 28. When you measure the drawer remember to remove it completely from the existing cabinet or dresser.