How Do You Measure Toolbox Drawer Slides

Only measure the box do not include the drawer front.

How do you measure toolbox drawer slides. Look on the side rail to see if you have a lever or tabs. You have the measure the same as size as per your drawer bottom side length. Measure from the back of the drawer-front to the end of the drawer box.

Place your thumbs on the slide rail alongside the drawer. Its straightforward to measure the perfect size of the slider for your Drawer. Learn how to remove and replace the slides on your tool chest or cabinet.

Suppose your Drawer outside the bottom side length is 16 inches. In this video Dan walks through sizing dovetailed drawers for use with BLUM soft close undermount slides and for side mount slides. This will unlock the drawer from the rail tabs.

Pull the drawer out until it extends fully. Step by step guide for measuring drawer boxes for KV soft closing drawer slides. Slides must be the same length as drawer to work properly.

Slides come in lengths from 10 to 28. Press the tabs on each side with your fingers if your drawer uses tabs instead of levers. So you have to take the same size as the slider for two sides of the Drawer.

If you are measuring a high back drawer then order your custom drawer based on the high measurement and. For side-mount and center-mount slides typically measure the distance from the front edge of the cabinet to the inside face of the cabinet back and then subtract 1. Push the drawer back 14 inch while holding the sliding rail still.