How High Should Cabinet Pulls Be

Like with knobs if the drawer is 24 or wider you can add a second pull.

How high should cabinet pulls be. 25 3 from top or bottom. It gives it a uniform appearance. Your knobs and handles from The Knobbery will set off the entire room when they match the relative scale of your drawers and doors.

There is no right or wrong size to choose but we do recommend choosing pulls that have at least a 3-34 center to center the distance between the screw holes. When placing your pulls remember that the 1 to 4 range based on your personal preference from the top or bottom edge of the drawer is the ideal placement. The longer pulls will also run more in cost since there are more materials used.

The pull should be at least ⅓ of the cabinet width to ⅔ of the cabinet width or greater. Always chose the same length for bar pulls for cabinet drawers. The first column of doors have 3-inch-long pulls.

Usually for cabinet door pulls we recommend placing the pulls vertically making it easy to open the doors again functionality is key. On base cabinets they are placed 2-12 to 3 from the upper corner of the door. The higher cost and greater use of material give off a high-class vibe.

On wall cabinets knobs are usually placed 2-12 to 3 from the bottom corner of the door. Divide the drawer in half and center a pull in each half and it will be perfectly balanced. Cabinet Hardware Sizing Guide.

Using one pull on the drawers would have worked but it would have meant using an appliance pull so using two saved about 50 per drawer. Having trouble finding pulls in the size that you need. When it comes to cabinet pulls placement for drawers under 24 pulls are most often centered and installed in the middle of the drawer panel.