How To Install Blum Blumotion Drawer Slides

The up and over lift system delivers clear visibility and easy access.

How to install blum blumotion drawer slides. Then push the drawer back into closed position until you hear the locking mechanism click or you can pull the slides toward the front of the drawer. The drawer slide passes through the notch in the back of the drawer. The locking devices automatically engage with the runners.

With the slides in place Ill use a self-centering drill bit to pre-drill holes in the front to attach the clips. Drawer removal Squeeze orange handles on locking devices Pull drawer straight out and up 1 2 1 2. Tilt the top of the drawer front forward.

Make adjustments if necessary. Drawer insertion Extend the concealed runners fully. Place the drawer on the runners and close.

Install the left slide put the board on the other side of the cabinet and install the right slide. Inside drawer width opening width minus 49 6 head wood or system screws Drawer insertion Extend the drawer runners fully. The bi-fold lift is ideal for high wall cabinets with large fronts.

You need to do this on both the right and left side of your drawer back. The easiest way to install the slides is to attach them to the cabinet with screws. You need to drill a 14 hole and cut a notch for your drawer glide.

Start with the top slides in each cabinet. I move the slide into position and tap a small mark where the hole needs to go. Cut one board for each drawer slide height.