How To Make A Jig To Install Cabinet Handles

True Position Tools TPT-1934 is an all-metal high precision jig that can install knobs handles and handle bars.

How to make a jig to install cabinet handles. To use the jig you just put a mark on it where you want the door pulls to be located and then drill a hole. Measure and cut two pieces of 18-inch-thick plywood with a circular saw to 4 inches long by 3 inches wide. The corner of the drawer front should fit snug into the corner on the L shape.

Step 2 Spread glue on one edge of each of the 4-inch dowels. The beauty of this jig is that it can be turned sideways and used for the cabinet doors as well. Place the jig on the front of the drawer using the L shaped poplar to square the jig on the drawer front.

ROK Template requires the minimal amount of skill to use with no moving parts. Our Cabinet Hardware Jigs will help you install your drawer handles perfectly every time. While holding the knob or handle with one.

How To Make a Jig For Cabinet Hardware To make the jig the first step we did was to measure the width of the stile mark the center point measured the handles then with a tape measure we marked the handle length on the cabinet stile. Make this simple jig to get the hole placement right every time. Heres how to install cabinet hardware correctly.

Then mark your exact hole placement on the cabinet and replicate that on your jig. The wood is glued and nailed together. Cut three 12-inch dowels to 4 inches and two dowels to 2-12 inches.

BEST JIG FOR LARGE KITCHENS. We locate the center point of our drawer front lay the slot in the jig right on the mark and just hold it in place as we drill the holes for the drawer handle. Then use the jig to measure the distance required between your handle holes and set the hole spacers.