How To Size Drawers For Blum Slides

A piece of scrap the thickness of whatever inset I need plus the 4 mm the hardware manufacturer recommends.

How to size drawers for blum slides. For side-mount and center-mount slides typically measure the distance from the front edge of the cabinet to the inside face of the cabinet back and then subtract 1. Pull one of your drawers outwards so its separated from the main piece of furniture. Using a ruler or tape.

Blum state that the internal dimension of the drawer is 42mm narrower than the cabinet opening. For full overlay drawers the type for which European mechanical hardware was originally developed the slides should be mounted 4 mm or just over 18 behind the front of the face frame. For under-mount slides measure the drawer length.

Please note that our online Excel planning tools only work on desktop or laptop computers. Side-to-side allowances range from 38 overall to 12 overall depending on series chosen. For products that arent available in the OPC Blum offers downloadable Excel spreadsheets that help you order the correct parts and calculate mounting locations.

For depth we recommend subtracting 1 from. If your cabinet opening measurement comes to 3 34 then you need to round down to a 3 12 drawer box. AVENTOS Door Weight and Parts Estimator.

Slides must be the same length as drawer to work properly. Measure the cabinet opening height inside frame to frame and subtract at least 12 from the opening height. Or the lower slides will be in the way of your boards for the slides that need to be installed above the lower ones The Blum instructions say to install the drawer slide 1516 behind faceframe for inset drawers which is what Im doing.

So once you have your cabinet depth rear socket brackets and mounting location you can safely match finalize your drawer slide length. Drawers can be built almost any width for bottom mount but the most common size is 34-inch smaller on both sides than the cabinet opening. XLS 1 MB 12-10-2020.