How To Use Filler On Wood

Apply the wood filler using a putty knife.

How to use filler on wood. Scrape the filler until it gets even. This product doesnt crack or shrink making it ideal for fixing large holes and splits. However you will have to move fast if.

Use even strokes and apply a thin layer of the stain. This will provide an even result that will hardly look like youve repaired it. You can scrape the excess filler off with the putty knife although it is a good idea to leave a little extra and not make the surface too smooth.

Once dry the wood filler can be painted but it is best to match it as close as possible to the rest of the piece. Use a foam brush or similar tool to carefully stain the wood filler. Gradually apply the filler as much as necessary.

Now use a clean putty knife to smooth out the filled area nicely. Depending on what wood filler you. Wood putty or wood filler is a much thicker mixture and is used to fill larger cracks and voids in the wood.

Ensure that the filler is going to the depth of the applied area. Apply the Wood Filler Push the putty by hand into the gouge scratch or hole on the work material then remove excess by hand. Apply the body filler to the affected surface.

Step 2 Make sure the hole you are filling is clean and free of any dust and debris. The FamowWood Latex Wood Filler formula has a viscous consistency that only requires you your wood putty knife and the hole in your wood surface. Sand and clean the wood surface in need of repair.