How Do I Measure For Cabinet Pulls

Subtract 1 to obtain opening capacity.

How do i measure for cabinet pulls. To help you choose the correct size of decorative hardware we have put together some images showing the relative scale of different pieces. The illustrations above show a face frame cabinet. A Post and Nut fitting is a very traditional way to mount drawer pulls.

For most drawers that are 34 thick you will have an excess protruding from the back of your drawer. Measure from the center of the screw hole in one threaded post over to the center of the other screw hole with a tape measure. Open both cabinet doors.

Best Methods for Building Furniture from Fine Woodworking by Fine Woodworking most cabinet knobs set in the stile are in the center of the stile 2 38 inches to 2 34 inches away from the outer edge of the cabinet. Choose the Correct Size. Your knobs and handles from The Knobbery will set off the entire room when they match the relative scale of your drawers and doors.

Measure opening as shown above. The right proportions make a big difference. The face frame itself is 1-12 wide all around.

According to the book Woodworking Techniques. Shelf depth must be 21 58. This is the measurement required when selecting replacement pulls.

How to measure your cabinet hardware pulls and what center to center means. Check for obstructions at back of shelf. For new pulls the standard ratio is ⅓ the width of the drawer front.